Status Report

NOAA SATOPS Morning Report: Thursday, June 14, 2012

By SpaceRef Editor
June 14, 2012
Filed under ,

SATOPS Morning Report: Thursday, June 14, 2012

Customers or users who want to call to ask about problems or report outages can use the following contacts:
– For questions about data quality (noisy data, dropouts, schedules), GOES or POES products, or status of spacecraft can call the SAB Shift Supervisor at 301-763-8444
– To report an outage or document a problem, call the ESPC Operations Crew Lead at 301-457-5218. All LRIT data users are encouraged to report problems to: [email protected]

DOY 166

GOES
All GOES operations were nominal over the past 24 hours.
No anomalies affecting product delivery via GVAR or s/c health & safety.
For GOES status and other information please see:
http://www.oso.noaa.gov/goes

POES
All POES operations were nominal over the past 24 hours.
No anomalies affecting product delivery or s/c health & safety.
For a detailed status and description of POES see:
http://www.oso.noaa.gov/poes

DMSP
Note: McMurdo reported down on June 10, 2012 at 1516z is now available for DMSP supports. Real-time data is being received however, recorder dumps will not be scheduled until DOY167.

All other DMSP operations were nominal over the past 24 hours.
No anomalies affecting product delivery or s/c health & safety.
For more DMSP Information please see:
http://dmsp.ngdc.noaa.gov/dmsp.html

JASON-2
All other JASON-2 operations were nominal over the past 24 hours.
No anomalies affecting product delivery or s/c health & safety.

ESPC Reported data outage and delays
The MG-1 antenna at McMurdo which supports Metop-A has been down since DOY162. Until further notice all Metop-A data will be received via full orbit download in Svalbard. Data which was previously scheduled for a half orbit to be received at McMurdo will suffer a small latency due to the delay in download.

ESPC will not receive the North and South 1700 UTC Cloud Data from OFFUTT AFB. OFFUTT AFB has been called and says that the data was missed because of a problem on site.

Questions or comments to [email protected]

SpaceRef staff editor.