Status Report

NASA Mars Rover Opportunity Update: Out of ‘Endurance’

By SpaceRef Editor
December 14, 2004
Filed under , , ,
NASA Mars Rover Opportunity Update: Out of ‘Endurance’
1P156152339ESF3900P2565L4M.jpg

Opportunity Status for sol 306-315

Opportunity has finished its work inside “Endurance Crater” and climbed out. Before leaving, the rover examined a transition point between dark and light rock layers about 20 meters (about 66 feet) from the rim of the crater. Communication with Mars Odyssey has been good, so the backlog of onboard data has improved. The rover spent six months inside the stadium-sized crater to study layered bedrock exposed there. The exit drive on sol 315 put Opportunity completely outside the crater for the first time since sol 134. Opportunity continues to be in excellent health.

Sol details:

Sol 306 was the second sol of inspecting a rock target called “Paikea” with tools on the robotic arm. On the previous sol, Opportunity had cleaned the surface of Paikea with its rock abrasion tool brush. During sol 306, the rover observed the target with the panoramic camera and the microscopic imager, then ground away a patch of the rock’s surface for about two hours with the rock abrasion tool. After the grind, the rover examined the fresh hole in the rock with the panoramic camera, hazard-avoidance camera and microscopic imager. This was followed by placement of the alpha particle X-ray spectrometer on the abraded area for later data collection. The rover woke at about 4:45 a.m. (local solar time) for a morning communication-relay pass with Odyssey on sol 307. Then it turned on the alpha particle X-ray spectrometer and gathered data until mid-morning.

Sols 307 through 309 were planned together as a three-sol plan. Sol 307 was similar to sol 306, with imaging, rock grinding, and overnight X-ray spectrometer measurements, this time targeted on “Wharenhui.” Also, between 1:30 p.m. and 2 p.m. local solar time, Opportunity used its miniature thermal emission spectrometer and panoramic camera to make observations coordinated with a Mars Global Surveyor overflight. In the late morning of sol 308, the rover placed its Moessbauer spectrometer on the freshly drilled hole in Wharenhui, and then collected data nearly continuously for the next two sols. In order to provide sufficient energy for this extended integration, overnight communication passes for the early mornings of sols 309 and 310 were sacrificed.

The grinding activity on sol 307 was not as productive as hoped, so plans for the next couple of sols were revised. Because the team had to wait for retransmission of some rock abrasion tool data on sol 310, the sol was spent using the microscopic imager, placing the alpha particle X-ray spectrometer, and performing about an hour of remote-sensing observations.

Sol 311 was spent re-grinding Wharenhui. The plan was to grind another 3 to 4 millimeters (0.1 to 0.2 inches) into the rock. The grind went as planned, microscopic images were taken and the alpha particle X-ray spectrometer was placed in the hole. That spectrometer’s integration was not started until the sol 312 early-morning Odyssey pass at 4:20 a.m. Mars local time.

The plan for sol 312 was to complete the alpha particle X-ray spectrometer integration begun in the early morning, perform about 45 minutes of observations with the panoramic camera and navigation camera, then drive about 12 meters (39 feet) toward the crater rim.

Total odometry after sol 311 was 1,766.07 meters (1.1 miles).

SpaceRef staff editor.