Smallsat News 26 July 2010
CubeSat EPS and Battery NASA GEVS Vibration test (video)
“Three Clyde Space CubeSat Electrical Power Systems (EPS) [a 1U EPS, 3U EPS and an XUEPS], were qualified to NASA GEVS vibration and shock levels to verify the manufacturing procedures we use for these products. Also included in the test were a 3U Battery and Battery daughter board.”
Colorado Space Grant Consortium, Lockheed Martin To Develop CubeSat, Lockheed Martin
“Students from the Colorado Space Grant Consortium (COSGC) have teamed with Lockheed Martin [NYSE:LMT] to develop a miniature satellite, known as ALL-STAR, which stands for Agile Low-cost Laboratory for Space Technology Acceleration and Research. The ALL-STAR program, designed to inspire and develop America’s future technological workforce, will provide students hands on experience in applying science, technology, engineering and math skills to building operational space systems. Lockheed Martin funded the program and company engineers from Sunnyvale, Calif., Palo Alto, Calif., Newtown, Pa., Albuquerque, N.M., and Denver are supplying their system engineering, program management and systems integration expertise to mentor the COSGC students as they design, develop, manufacture and deliver the CubeSat.”
CubeSat Propulsion, SouthGate Amateur Radio Club
“Two videos on YouTube video show the concept for a CubeSat propulsion system using plasma electrolysis of water. This prototype shows that thrust can be produced by plasma electrolysis – it burns water, so to speak. The system has to be optimized to avoid “unburned” droplets. In this early prototype the water injection is triggered manually by short pumping bursts of an electric membrane pump. The next version will be designed to have an active burn control and the ability to operate with low voltage (high amps).”
How to make affordable solar pannels for CubeSat pico-satellites?, Northern Arizona Wind & Sun
“I am currently working on a CubeSat 10x10x10 cm cubical satellite whose total mass must not exceed 1 kg. I mention that this is a school project and it is unlikely the satellite will actually go in orbit. Most probable, once finished, the cubesat will remain in the lab.”
